Published on: 23-Aug 05:18am
The Port can be selected via the Vinyl Spooler > Connection tab.
You can open the Vinyl Spooler from the File (menu) > Cut/Plot > Vinyl Spooler.
Select or Change the Port
To select or change the Port go to Connection Method and set the Port Type which will then update the Settings directly below this section.
Genel sorgular ikamet eden bir şey belirli bir makale mi arıyorsunuz? Sadece çeşitli ilgili klasörler ve kategoriler göz atın ve sonra istediğiniz yazı bulacaksınız.
Bize Ulaşın